Header Photo Temp

SC2000 XPR Completion Screen

The SC2000 Series XPR completion unit for oil and gas wells provides a clean, sand-free wellbore and the lowest reservoir backpressure for increased production flow and rod-pump longevity. Many operators are not achieving full-production potential because of backpressure on the reservoir caused by sand infill and liquid loading. The XPR completion unit provides a single answer to both problems.

Applications

  • Rod lifted gas and oil production and well workovers, solids infill control, and gas well fluid-loading control
  • Cased-hole, perforated-interval-interface, or new drill completions

Features, Advantages and Benefits

  • The XPR unit incorporates a high-performance, matrix-metal™ reservoir interface. This feature protects against sand infill and liquid loading to enhance production and extend pump life. It also prevents premature rod-pump failure caused by solids production, extending equipment life while preventing nonproductive time (NPT).
  • Unique, rugged, corrosion-resistant, matrix-metal, stainless steel-screen design with standard 100- micron control point results in lower pressure drops for longer service life and higher production flow.
  • Heavy-duty CrossBar™ style shroud enhances flow vectoring attenuation of fluids, and flow distribution in perforated cased hole completions.
  • The XPR unit provides cost-effective, easy installation and protects the rod pump from excessive wear—minimizing capital costs to replace failed rod pumps, as well as avoiding NPT.
  • Integrated pumping sump increases rod-pumping-productivity.
  • System design can accommodate oil or gas wells of any size.

Options

  • On/off tool/torque safety join

Need a quote?

Request one from us by clicking on the link below!

Stren SC2000 XPR

SC2000 XPR completion screens provide a clean, sand-free wellbore for increased production flow and pump intake protection. Meeting or exceeding all other industry products, our inflow surface area ranges to 60 percent + compared with wire-wrapped screens or sand pre-packs at 3 to 9 percent.
SC2000_XPR
“If you let sand get into your pump, you have a fight on your hands.”

SC2000™ Series XPR™ Example Capacity Ratings for General Applications


Sc2000 Xpr Completion
Capacities to thousands of BPD and more by threading units end-to-end to reach capacity required. Contact the Applications Engineering Dept. of Stren for well configuration and support assistance.
SC2000 XPR Completion

Product Description Oil Well Production Completions Gas Well De-watering Completions
Completion Series Stren XPR2012 CrossBar™: 2-3/8″ 4.7# J55 base, 8rd EU connections, 100 micron control point and CrossBar™ high performance shroud. Max OD = 3.20″ x 15 ft OAL with 1.5 ft bare pipe handling ends. 150 BPD, Based on average conditions, conventional +/- 30 API gravity 200 BFPD, Gas Well Post Frac Applications
Completion Series Stren XPR2512 CrossBar™: 2-7/8″ 6.4# J55 base, 8rd EU box connections, 100 micron control point and CrossBar ™ high performance shroud. Max. OD = 3.70″ x 15 ft OAL with 1.5 ft bare pipe handling ends. 200 BPD, Based on average conditions, conventional +/- 30 API gravity 250 BFPD, Gas Well Post Frac Applications
Completion Series Stren XPR3012 CrossBar™: 3-1/2″ 9.2# J55 base, 8rd EU box connections, 100 micron control point and CrossBar ™ high performance shroud. Max. OD = 4.35″ x 15 ft OAL with 1.5 ft bare pipe handling ends. 240 BPD, Based on average conditions, conventional +/- 30 API gravity 300 BFPD, Gas Well Post Frac Applications